Call Us
Customer Support & Sales
+919996186555
Home » Products » Bitumen Testing Equipment » Ductility Testing Equipment

Ductility Testing Equipment

Ductility Testing Equipment
Ductility Testing Equipment
Send Inquiry
Product Code : BIT- 15
Brand Name : ATICO
  • Voltage
  • 220 V AC Volt (v)
  • Application
  • Lab Equipment
Product Description

DUCTILITY TESTING MACHINE 

Advanced Technocracy Inc. is Manufacturer, Exporter &Supplier of DUCTILITY TESTING MACHINE

In flexible pavement construction, bitumen binders are used. It is important that bituminous material forms ductile thin film around the aggregates, Which serves as a binder. The binder material not of sufficient ductility render spervious pavement surface and leads to develop ment of cracks. Therefore it is important to carry out the ductility tests on bituminous material. Ductility is defined as distance in cms to which a standard briquette of bitumen can be stretched before the thread breaks. The briquette is stretched at a rate of 50mm/minute ±25mm per minute at a temperature of 27degC +/- 0.5degC.
Salient Features:

  • The apparatus consists of a water bath with a thermostatic heater, and a circulating pump to maintain uniform water temperature.
  • The apparatus consists of a water bath with a thermostatic heater, and a circulating pump to maintain uniform water temperature.
  • One half of the briquette molds is fixed on a fixed plate in the water bath, the other half of the briquette mold is fixed to a carrier which slides over a rotating threaded shaft with a clutch.
  • The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath.
  • A pointer fixed to the carrier moves over a scale graduated from 0-110 cm x 1mm fixed on the bath with  (zero) of the scale towards the fixed plate side.
  • The rotating shaft has 2 speeds of travel for the bracket, 5cm/min and 1 cm/min., selected by a clutch. Water bath inside is aluminum, it is an insulated water bath. Water bath is provided with a drain. A heater with thermostatic control is fixed inside the water bath. Controls witches for motor, stirrer, heater and indicator lamps are fixed at a convenient place on the water bath, complete with three briquette molds and one base plate, all made of brass. Operates on 230 volts A.C. single phase. 

Accessories :  

  • Thermometer IP 38 C, range 23degC to 27degC.
  • Ductility mould with base-plate.


ADVANCED TECHNOCRACY INC.
X