Advanced technocracy inc. Is manufacturer, exporter & supplier of Gas Turbine Test Rig.
The Gas Turbine test rig will have at least the following units
Turbocharger Assembly: Composed of centrifugal compressor (in light alloy) and turbine (in cast iron) with the following features: operating at maximum compression ratio of about 2 : 1. operating at a speed of approx. 30,000 to 50,000 r.p.m
Combustion Chamber : Shall consist of an external chamber and a flame tube mounted inside it. The combustion chamber will have such designed that there is even distribution of heat and there are no over heating points. The turbine which starts compressor will be a centrifugal machine with 75mm dia.
Power Turbine Group: The Rotor assembly of the turbine will be perfectly balanced and will have arrangement for continuous lubrication. The larger turbine will attain a maximum speed of 2,000 to 23,000 r.p.m and the turbine power will be transmitted to the alternator by the means of toothed belt having transmission ration of 1 : 4.28 producing approx. 1.KW at 3,300 rpm.
Fuel System: The Turbine will be able to work on Propane or L.P.G.
The following will also be provided with the Gas Turbine set up
'U' shaped manometer to measure turbine air consumption.
Techno meters to measure the speed of turbo compressor unit, rotating speed of power turbine.
Gas flow rate regulation valve and Gas flow meter to measure gas flow rate measurement.
Auxiliary Starting fan
Oil tank 20ltr capacity
Water/oil heat exchanger
Digital ammeter and voltmeter
2 Nos digital temperature indicators with 3 reading each, 6 nos pressure gauges.
Complete digital electronic instrumentation for control and measurement of power absorbed by the alternator.
Gas exhaust duct, wheeled frame with mimic diagram panel
Apart from the above, system will have control devices for control and operation of fan, pump, gas pressure, gas flow, turbine braking etc.
The system will have the following also
Oil cooler system
Oil heat exchanger
Gas Generation Turbine R.P.M: Working range 30000 to 50000
Power Turbine R.P.M: Operating range 2000 to 23000
Generator R.P.M: Operating range 330 to 3300
Alternator Power Output (Max. at 3300 rpm): 1.0 K.W.
The system will be supplied with automatic safety device to prevent over speeding.
The unit will have an automatic closed circuit pressurized lubrication system along with tube nest oil cooler for cooling the oil.
The unit will have at least the following safety measures
Luminous Intermitants signals, near the critical temperature.