Advanced Technocracy Inc. is Manufacturer, Exporter &Supplier of ISOTHERMAL CSTR.
In an ideal CSTR (Le. an ideal steady state flow reactor) the contents in reactor are well mixed and have uniform composition throughout. Thus the exit stream has the same composition as the fluid within the reactor. This type of reactor is known as mixed flow reactor.This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under isothermal condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The magnetic drive pump is used for circulation of feed. The CSTR is fitted with stirrer for proper mixing. From top outlet of it samples are collected for analysis. Constant temperature water bath arrangement is provided to conduct the experiment at various temperatures.
Experiments:
Utilities Required:
Technical Details:
Reactor | Material Stainless Steel, Capacity 2 Ltrs. (Approx) |
Water Bath | Material Stainless Steel, Double wall, insulated with Ceramic Wool |
Heater | Nichrome wire Heater |
Stirrer(2Nos.) | Stainless Steel Impeller and shaft coupled with FHP motor. (One each for WaterBathand Reactor) |
Feed Tank (2Nos.) | Material Stainless Steel, Capacity 20 Ltrs. with level indicators, feed lines, drain valve etc. |
Feed Circulation (2Nos.) | By pumps, Magnetic drive made of Polypropylene |
Flow Measurement | Rotameter 2Nos. (one each for Reactants) |
Feed Piping | PVC / SS |
Stop Watch | Electronic |
Temp. Sensor | RTD PT-100 type |
Control panel | Digital Temp. Controller: 0-199.9 deg C (For Hot Water Bath), On/off switch, Mains Indicator etc. |
Optional Utility extra | Peristaltic pumps in place of rotameter and magnetic drive pump (2 no.) |