Amidst an extensive array of testing instruments, we also manufacture, export and supply Isothermal Tubular Reactor. The offered reactor is used to study non-catalytic homogeneous reactions under isothermal condition. Manufactured under the stern guidance of our highly skilled technocrats using superior quality components and contemporary technology, our reactor is also tested on several quality parameters in order to ensure its flawlessness. Moreover, the provided Isothermal Tubular Reactor is made available for clients in various technical specifications at reasonable rates.
Features:
Hassle-free operation
User friendly design
Longer service life
High efficiency
In an ideal Plug Flow Reactor {PFTP} there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. In case of a coil turbulence is introduced due to frequent change in direction of flow and presence of secondary flow, so a higher value of reaction rate constant is expected in coil tube type plug flow reactor. This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The magnetic drive pump is used for circulation of feed. It is a helical coil tube type reactor kept in a constant temperature water bath to conduct the experiment at various temperatures. Reactants enter at lower end coming out of the top of coil from where samples are collected for analysis.
Experiments:
Sponification Reaction study in Isothermal Plug flow Reactor
To determine Reaction Rate Constant and effect of temperature on it
Utilities Required:
Water supply and drain
Electricity-I.5kw, Single
Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted
Technical Details:
Reactor | Material Stainless Steel, Capacity 0.7 Ltrs. (approx) (Helical Coiled Tube Type) |
Water Bath | Material Stainless Steel, Double wall, insulated with Ceramic Wool. |
Heater | Nichrome wire Heater |
Stirrer(2Nos.) | Stainless Steel Impeller and shaft coupled with FHP motor. (One each for Water Bath and Reactor) |
Feed Tank (2Nos.) | Material Stainless Steel, Capacity 20 Ltrs. with level indicators, feed lines, drain valve etc. |
Feed Circulation (2 nos.) | By pumps, Magnetic drive made of Polypropylene |
Flow Measurement | Rotameter 2Nos. (one each for Reactants) |
Feed Piping | PVC / SS |
Stop Watch | Electronic |
Temp. Sensor | RTD PT-100 type |
Control panel | Digital Temp. Controller: 0-200 degC. RTD PT-100type (For Water Bath) On/off switch, Mains Indicator etc.
|
Optional Utility extra | Peristaltic pumps in place of rotameter and magnetic drive pump (2 no.) |